How To Fix Computer Making beeping sound on startup
Computer makes a beeping sound when switched on, the CPU and motherboard
fans start but there is no display on the monitor. Even after restarting the
same problem occurs.
You are more likely to face this error , when you have not
used the computer for a month or so, especially after certain seasons.
How to Fix it:
1. Try to find the cause of the error . When a computer is switched on
, the hardware runs a power on self test (POST). If any errors in the
hardware are detected in this test, they are indicated by audio
beeps or an error code is displayed on the screen. The sequence of
beeps and error codes vary according to the manufacturer of the motherboard and
should be noted down for troubleshooting the problem..
2. Remove all the connectors for the mouse, keyboard, display and power
cable from the CPU. Then remove the cover of the CPU. For most models
of desktops, there is a single cover, which can be easily removed by
hand, even without a screwdriver. For assembled computer the layout may make
troubleshooting difficult.
3. If you have not used the computer for a long time, there is likely to be
a lot of dust on the motherboard. Remove the dust using compressed air.
This is recommended by most troubleshooting guides on the internet , but
compressed air is not available in most hardware stores in other
countries. Instead, use a thick paint brush. The CPU and power supply fan
will have the most dust.
4. After removing all the dust, plug back all the connectors and restart the
computer. If the beeping sound persists, open up the computer again.
Check if all the dust is removed.
5. Remove the RAM from the memory slot, remove all the dust and reseat
it again. Remove all dust from the computer slot also, so that proper contact
is made between the RAM card and the PCB. Take care to ensure that the memory
is fixed properly, else you could face a problem again.
6. In most cases, the problem is solved at this stage. If it still
persists, a part may have got damaged, so you may have to get replacement
parts according to the diagnostic code.. In most recent model computers, most
of the components are soldered onto the motherboard, so instead of
repairing a part, it is better to get it replaced.
7.Install or Run antivirus
Congratuations You're Now A Pro. You may not be able to man a technical support line with the information we've provided in this article, but these tips should help you disentangle many frustrating printer or Pc issues. Keep this information around for later reference and maybe next time you'll beat your project deadline. Please Visit and bookmark my blog/manual ::: Fix your computer blog to get live or more support details and software downloads
I also offer Free Personal Love Advice to all my readers.
Article Rating (2 stars):
- Article Word Count: 397
- |
- Total Views: 199
- |
- permalink